Transparent plastic characteristics : transparent insulation thermoplastic environmental protection plastic products, plastic transparent After burning the odourless tasteless, does not produce poisonous gas. Transparent, surface water ripple, crystal point, one like white, grease and toughness, and strong resistance, chemical resistance, good resistance to impact strength, low temperature resistance to impact strength is also good, is about 20% higher than PVC standard). Used for blister, folding boxes, packaging, printing, CARDS, etc. Of transparent insulation use of transparent insulation used in electronics, printing, packaging, insulation, soft lines, a display screen saver PET, membrane switch, membrane Windows, printing film, puzzle film base, stickers bottom paper, glue, silicon coating, belt, instrument panel, cable capacitance motor gasket, insulation stripping, furniture, window film, protective film inkjet printing and decoration, etc. PC transparent insulation slices are double-sided polishing film, has good pervious to light quality and high dimensional stability. Can make the required by electroplating process and screen printing various textures, decoration and optical effect for aesthetics.
PC is a kind of amorphous, odorless, non-toxic, highly transparent colorless or yellowish thermoplastic engineering plastics, has excellent physical and mechanical properties, especially the excellent impact resistance, high tensile strength, bending strength, compression strength; Creep is small, size stability; Has good heat resistance and low temperature resistance, in relatively wide temperature range has the stable mechanical properties, dimensional stability, electrical properties and flame retardancy, can use for a long time under the 60 ~ 120 ℃; No obvious melting point, in 220-230 ℃ in the molten state; Due to the molecular chain rigidity, resin melt viscosity; Bibulous rate is small, small shrinkage rate, high dimensional accuracy, good dimensional stability, membrane permeability is small; Self-extinguishing material; Light is stable, but not resistant to ultraviolet light, good weatherability; They can withstand oil, acid, alkali resistant, oxidizing acid and amine, ketone, soluble in chlorinated hydrocarbons and aromatic solvents, easy cause hydrolysis and cracking in the water for a long time, the disadvantage is that because of the fatigue strength is poor, prone to stress cracking, the solvent resistance is poor, poor wear resistance. Product features: environmental protection, flame retardant, impact resistance, high and low temperature resistance, good dimensional stability and good insulation.
Specifications china transparent injection molds making
1.Our clear transparent parts are widely recognized and trusted by users and can meet continuously developing economic and social needs.
2. Quality hot runner already widely used to reduce cycle times and maintaining the shinning and clear surface during long time production.
3. we guarantee the mould life and injection mold spare part use /changeable.
4. S7/H13/2344 after heat treat, the hardeness will be up to 52-54 HRC to get longer mold life.
NAK80, 718 is also good chooice for transparent clear injection mold making in china.
5. High-quality steel has to be tested and certificated from steel supplier in accordance with transparent part.